Start with the problem, not the product
People install filters for four reasons: taste and smell, sediment and cloudiness, hard water scale, or a concern about a specific contaminant. Each reason points to a different product. A carbon filter helps with chlorine taste and odor. A sediment filter catches sand and particles. A softener handles scale. Reverse osmosis is for drinking water at a single tap.
Before buying anything, get the facts. The City of Milpitas publishes an annual water quality report, also called a consumer confidence report, that lists what is in the water supplied to your home. Read it first. If a test of your own tap shows something unusual, a certified lab can run a more detailed test.
Filter types and what each does
| Type | Removes or reduces | Where it fits |
|---|---|---|
| Sediment filter | Sand, silt, rust flakes | Whole house, first stage. |
| Carbon block or granular | Chlorine taste, odor, some organics | Whole house or one tap. |
| Salt-based softener | Calcium and magnesium (hardness) | Whole house. |
| Reverse osmosis | Dissolved solids and many contaminants | Under-sink, drinking tap. |
| UV light | Bacteria and viruses | Private wells, not city water. |
| Scale conditioner | Reduces scale adhesion without removing minerals | Whole house, light scale. |
No single filter handles everything. Combine stages only for reasons you can name.
What a whole-house filter cannot do
It does not make city water into pure water. It does not remove everything, and it does not fix a pressure problem. A carbon filter can reduce pressure if it is undersized or clogged, and filters need cartridge changes on schedule. A neglected filter can harbor bacteria, so replacement is part of the cost.
It also does not replace a softener. Filters take things out of the water, but they leave the hardness minerals alone. If your issue is white scale, you want a softener or a scale conditioner. See water softener and filtration for how we match a system to a problem.
How a whole-house system is installed
Pick the location
The system goes on the main line after the shutoff and before the water heater, usually in the garage.
Shut off the water
The main is closed and the line is drained.
Cut in the system
Unions and a bypass valve are installed so you can service the filter later.
Install the pressure gauge
Gauges before and after show when the filter needs changing.
Flush and start
The cartridge is flushed and the line is tested for leaks.
Set the service schedule
Cartridge change dates are noted for you.
Want a plumber to handle it?
Call and a person answers, any hour. You hear the price before any work starts.
What the City of Milpitas publishes about its water
The City of Milpitas publishes the hardness and the sources of its supply in that report. Hardness in recent reports ranges from about 8.4 to 168 ppm, with averages around 57 to 110 ppm depending on the supply. The city also lists its treatment disinfectant and monitoring results in the report.
Because the mix of sources changes through the year, the same tap can taste different in different months. A filter with a carbon stage smooths out those changes. Ask the City of Milpitas Office of Building Safety whether your installation needs a plumbing permit before work begins.
Homes on the San Jose side of the line are served by different utilities, and our San Jose service page explains how we handle those addresses. If you need scale control more than taste, read our tankless water heater page for why scale matters to the heater.
Source type: City of Milpitas annual water quality report.
Questions to ask before you buy
- What problem does this solveIf the seller cannot say, keep looking.
- What is the flow ratingMatch it to the number of bathrooms so pressure stays steady.
- How often do cartridges changeAsk for the price of a replacement set.
- Is it certifiedLook for NSF/ANSI certification for the claims made.
- Is there a bypassYou need one for service.
- Who installs and services itParts and labor should be available locally.
A simple maintenance schedule
| Part | Check or change | Why it matters |
|---|---|---|
| Sediment cartridge | Every 3 to 6 months, sooner if the gauge shows a pressure drop | A clogged cartridge starves the house of flow. |
| Carbon cartridge | Every 6 to 12 months | Spent carbon stops removing taste and odor. |
| Housing O-ring | At every cartridge change | A dry or flat O-ring leaks. |
| Pressure gauges | Glance at them monthly | A widening gap between the two gauges shows clogging. |
| Bypass valve | Operate it once a year | A seized bypass is useless in an emergency. |
Write the change dates on the housing with a marker, so the schedule does not depend on memory.
A simple plan for most Milpitas homes
For a typical house, start with a sediment prefilter and a carbon filter for taste if chlorine bothers you. Add a softener if scale is an issue. Add a reverse osmosis unit at the kitchen sink only if you want the extra reduction for drinking water. Skip the rest unless a test points to a specific need.
We install and service these systems. Call (510) 544-1962 and tell us the problem, and we recommend only what fits. If you are in North San Jose, the same applies, since we serve our San Jose service page. Give us your cross streets when you call so we can confirm that we reach you.
Common Questions
Not necessarily. The city's water meets state standards. A filter is for taste, sediment or personal preference, so start with the problem you want to fix.
A properly sized and maintained one should not. An undersized or clogged filter can.
A filter removes particles or chemicals. A softener removes hardness minerals. They solve different problems.
Follow the maker's schedule, usually every 3 to 12 months depending on the type and water use.
Treatment equipment tied into the potable system may need a plumbing permit. Confirm before installation.
