Faucet problems and what usually fixes them
| Problem | Likely cause | Fix |
|---|---|---|
| Constant drip from the spout | Worn cartridge, washer or seat | Replace the cartridge or washer. |
| Leak at the base of the handle | Worn O-ring or packing | Replace the O-ring. |
| Low flow | Clogged aerator or mineral buildup | Clean or replace the aerator. |
| Water under the sink | Loose supply line or failed stop valve | Replace the line or valve. |
| Hot and cold mixed | Failed cartridge | Replace the cartridge. |
| Outdoor spigot leaks inside the wall | Failed packing or a cracked stem | Repair or replace the hose bib. |
A leak that appears only when the faucet is on is different from one that continues when it is off. Tell us which.
Why a drip is worth fixing
One drip per second adds up to thousands of gallons a year. The waste is real and the sound is annoying, and in a house with hard water the drip leaves mineral stains in the sink. Milpitas water ranges from soft to fairly hard depending on the supply source, with city reports showing averages around 57 to 110 ppm and a wide range over the year.
Minerals clog aerators and age cartridges faster in the harder periods.
Fixing a faucet early is a small job. Waiting until the handle will not turn can turn it into a replacement.
Types of faucets we work on
- Single-handle kitchen faucetsCartridge or ceramic disc designs, common in newer kitchens.
- Two-handle bath faucetsWasher-type and cartridge-type, both repairable.
- Pull-down and pull-out sprayersHose and weight problems, diverter failures and leaks at the spray head.
- Shower and tub valvesDripping tub spouts and shower valves where the cartridge has failed.
- Outdoor hose bibsDripping or leaking spigots. A burst hose bib line is covered under burst pipe repair.
- Bar and laundry sinksSmaller faucets with the same parts as larger ones.
Faucet dripping?
Call and we will book a plumber.
Repair or replace the faucet
If the faucet body is sound and parts are available, repair is the cheaper path. Older faucets from discontinued lines can be hard to source, and a corroded body will not seal even with new parts. When a replacement makes sense, we can install the one you picked or bring one.
We install new faucets with new supply lines and check the stop valves at the same time, because an old stop valve often leaks the day you disturb it. Replacing a stop valve is a common companion job. For a larger kitchen or bath update, see plumbing installation.
What affects the cost of faucet repair
You hear the price first.
Standards behind the work
Faucet and supply parts must be lead-free and certified to NSF/ANSI/CAN 61, according to the City of Milpitas Office of Building Safety, which follows the California Plumbing Code, which is based on the Uniform Plumbing Code (UPC).
Common Questions
A slow drip can wait for a scheduled visit. If water is spraying or collecting under the sink, close the stop valves under the sink and call.
The aerator is usually clogged with minerals. Unscrew it and rinse it, and if that does not help, call us.
Yes. Send us the model name and we confirm the fit before the visit.
Most repairs take 30 to 60 minutes. A replacement takes about an hour.
Yes. Tell us if it leaks at the handle, the spout or inside the wall.
